Robotics

Code Real Electronics in Your Browser

Your next step after Robotics Introduction. Use a free online simulator to wire lights, buttons, a dial and a motor to a small computer, and write the Python that makes them work. No kit to buy: everything runs in your browser, and the same code runs on a real board later.

Lessons
5
Time
About 1 hour 15 minutes
Level
Beginner
  • Free
  • Certificate
  • No video needed
  • Works offline

Who it’s for

Anyone who has finished Robotics Introduction, or knows what sensors, actuators and a controller are. Secondary school students, university students and makers.

Before you start

A laptop works best; a phone works for reading and for the code boxes. Some Python helps but is not required. A free Wokwi account if you want to save your projects.

What you’ll learn

  • Run your own code on a simulated Raspberry Pi Pico
  • Wire an LED and a button safely, and say why each wire goes where it does
  • Read a dial and use it to control brightness
  • Move a servo motor to any angle
  • Build a small sense, think, act project: a gate that opens at the press of a button

Lessons

Earn a certificate

Certificates are issued automatically, with a link anyone can use to check they are real. Finish every lesson to earn it.

Certificate of Completion

  • Not yet: All lessons complete (0 of 5)
  • Not yet: All checkpoints passed (0 of 1)