Sensing the world · Lesson 2 of 5· 20 min
A water tank that warns you
Why this matters
Many homes, schools and clinics store water in a tank on a stand. Nobody climbs up to look until the taps run dry.
Example
Teaching scenario (fictional)Fatmata looks after the water tank at a primary school in Bo. The tank is 150 cm deep. She wants a buzzer to sound when the water drops below a quarter, so there is time to order more before the children have none.
From distance to level
Mount the sensor at the top of the tank, looking down. It measures the gap to the water. The water level is the tank depth minus the gap.
Try the maths here first. Press Run:
On the board
Add a buzzer to your circuit from the last lesson: one pin to GP15, the other to GND. Then add this below your distance_cm function, replacing the old loop:
from machine import PWM
buzzer = PWM(Pin(15))
TANK = 150
while True:
gap = distance_cm()
if gap is not None:
percent = (TANK - gap) / TANK * 100
print(round(percent), "% full")
if percent < 25:
buzzer.freq(1000)
buzzer.duty_u16(32768) # sound on
else:
buzzer.duty_u16(0) # sound off
time.sleep(1)
Checklist
0 of 3