Sensing the world · Lesson 3 of 5· 18 min
Watching temperature and damp
Why this matters
Heat and damp spoil stored food. Maize and rice that get damp can grow mould, and the loss can be a family's income for months.
Example
Teaching scenario (fictional)Achieng stores maize for a farmers' group near Kisumu. She wants a light to come on when the store gets too warm or too humid, so the group can open it to air.
The DHT22 sensor
The DHT22 measures temperature and humidity (how much water is in the air) on one data wire.
Open a tool
Wokwi simulator
Free, nothing to install. Works best on a laptop; on a phone you can still read the steps and the code below.
Opens wokwi.com in a new tab. Come back here when you are done.
Step by step
-
Add a DHT22 in Wokwi.
-
Wire VCC to 3V3, GND to GND and SDA to GP15.
-
Add an LED with its resistor on GP16, as in the earlier course.
from machine import Pin
import dht
import time
sensor = dht.DHT22(Pin(15))
warning = Pin(16, Pin.OUT)
while True:
sensor.measure()
temp = sensor.temperature() # degrees Celsius
damp = sensor.humidity() # percent
print(temp, "C", damp, "%")
if temp > 30 or damp > 70:
warning.value(1)
else:
warning.value(0)
time.sleep(2)
Click the sensor in the simulator to change the temperature and humidity, and watch the light.
Where do 30 and 70 come from?
They are examples. For a real store, ask someone who knows the crop, such as an agriculture extension officer, what is safe, and use their numbers. A sensor project is only as good as its limits.
Your task
Change the program so the light blinks fast when both limits are passed, and stays on when only one is.